Çevre dostu malzeme ile üretilmiş hafif ve kablosuz oyun kulaklığı
Geri dönüştürülmüş malzemelerden üretilmiş hafif, çevre dostu tasarımı ve fileli kaplamaya sahip dayanıklı deri kulak yastıkları ile donatılmış Thian kablosuz kulak üstü kulaklıklar, çevre –  ve sizin rahatınız –  düşünülerek üretilmiştir.
Dahili şarj edilebilir bataryası ile 13 saate yakın oyun deneyimi sunarken, kulaklıkla birlikte sağlanan 5.8 Ghz USB dongle, her oyun deneyiminizde sizlere ışık hızında bağlantı imkanı sunar.
Kolay ve rahat bir kontrol deneyimi sunan kulaklığın  yan tarafından ses seviyesini ve mikrofonun ses kapatma/açma durumunu ayarlayın. Bununla birlikte kulaklığın katlanabilir mikrofonu esnek yapısıyla döndürülebilir bir filtreye sahiptir.
Oyun kulaklığı
USB alıcı
30 cm USB-A - USB-C şarj kablosu
1,2m ses kablosu
Boş USB bağlantı noktası
USB bağlantı noktası veya USB duvar şarj cihazı (şarj etmek için)
Versiyon 1.0 | Çok dilli
EU declaration of conformity (DoC)
To install:
- First fully charge the headset. This will take approx. 3 hours.
- When the headset is fully charged, plug the receiver into the device (computer/console).
- Switch the headset on by long-pressing the middle button
- Make sure the headset (and esp. the microphone) are allowed to be used by applications in the privacy settings.
- Set the headset as the default device, for both input and output in the sound/audio settings.
- Verify that the microphone is not muted (both on the headset as well as on the device), and that the volume is turned up (both on the headset as well as on the device).
- The headset is ready to use.
Headset indicators:
No light = Power off
Blue light solid = Power on and connected
Blue light flashing = Pairing
Red light = Charging
Red light off = Battery full
USB dongle indicator:
Blue light flashing = Pairing
Blue light solid = connected
It appears that the headset is not properly paired with the receiver. To pair the receiver:
- Make sure the USB receiver is connected to the PC and the headset is turned off.
- Place the headset very close to the USB-receiver. This step is very important for pairing. Headset and receiver must be almost in direct contact.
- At this point, press the headset's power button until you hear a kind of noise or beep, at that moment DO NOT release the button, wait a couple of seconds more until you see that the light on the USB receiver has stopped flashing.
- The receiver and headset are now re-paired.
If you are experiencing audio issues on your Dell computer, make sure to install the latest audio drivers for your computer from the Dell website at https://www.dell.com/support/home/en-us?app=drivers
After you have installed the Dell software and drivers for your computer setup the software correctly to activate the audio devices:
1. Go to the Windows Start Menu and open the Dell Optimizer software.
2. Click the Audio button.
3. Toggle the Switch to ENABLED.
4. Toggle the NOTIFICATIONS on.
5. Disable the Audio page and close the application.
6. When plugin the microphone, headset or headphones, the Optimizer will notify that a device is connected to the audio port. Select the correct device that is attached in the Optimizer option menu.
If this does not solve your problem, contact the Dell support or your system administrator.
It's not possible to provide a replacement receiver for this product.
This is due to the fact that during production the product and receiver receive a unique code, so the product can only communicate with the bundled original receiver.
If the dongle cannot connect to the headphones, the LED on the dongle will flash. Try to unplug the dongle and plug it back in after a few seconds to reconnect the headphones.
Does it only happen when you use it wirelessly, not when you use it wired?
If yes, make sure that other devices close by don't cause wireless interference, e.g. routers, cables, phones.
We would also advise to keep wireless as well as metal objects away from the (USB-adapter of the) headset. And to make sure that the USB-adapter is connected directly to the USB-port without using a hub or extension cable.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
This headset includes an audio cable to make a wired connection. In this way, you can plug it into all your devices with a 3.5mm audio connection, such as your PC, laptop, Xbox, PlayStation or Switch.
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.