Bir USB-C veya standart USB portuna takılan mikro alıcıya sahip kablosuz fare
Kablosuz fare
Çift bağlantı mikro alıcı (USB ve USB-C)
1 adet AA pil
Kullanım kılavuzu
Windows 10, 8 veya 7
Mac OS X 10.5 (Leopard) veya daha üst bir sürüme sahip Intel tabanlı Mac*
Chrome OS*
USB portu
*Yan düğmeler için sınırlı destek
Versiyon 1.0 | Çok dilli
Uyumluluk bilgileri
Versiyon 1.0 | Çok dilli
EU declaration of conformity (DoC)
- Open the battery cover on the bottom of the mouse
- Take the USB-receiver out of the mouse
- Place a full battery in the battery compartment
- Close the battery cover
- Connect the USB-receiver with the USB or USB-C connection to your computer.
- Turn the mouse on with the on/off button on the bottom of the mouse.
- The computer will recognize the mouse and installl the built-in driver, this might take a few moments
- The mouse is ready for use.
This product doesn't need any drivers to function.
Just connect and the product should work.
Depending on the version of your mouse, the receiver is stored either inside the product (bottom) itself, or inside the battery compartment of the mouse.
It's not possible to provide a replacement receiver for this product.
This is due to the fact that during production the product and receiver receive a unique code, so the product can only communicate with the bundled original receiver.
We advise to first double-check the batteries, then disconnect the receiver, restart the computer and reconnect the receiver.
If the issue persists, test the mouse by connecting the receiver to another USB-port and another computer.
We would advise to check the following:
If the issue persists, test the mouse on another computer.
Firstly, we would advise to check if it’s a software problem or if there’s an issue with the hardware. To test this, you can either plug the mouse (with fresh new batteries) into another computer, or plug a different mouse into the computer.
If it is a software issue we would advise to:
- Check if single-clicking is enabled
- Check if double-click speed is set too low
- Reinstall the mouse driver by removing the current mouse driver and let Windows reinstall it. To do this, right-click the Start Button and choose Device Manager. Expand the Mice and other pointing devices category and right-click your mouse. Choose Uninstall device, then restart your PC.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.