Высокопроизводительная игровая мышь с RGB-подсветкой
Игровая мышь с подсветкой
Наклейка с игровой тематикой
Windows 10, 8 или 7
Разъем USB
Версия 1.1 | Разноязычно
Краткое руководство по установке
Версия 1.0 | Разноязычно
Расширенное руководство
Версия 1.0 | Разноязычно
Информация о соответствии
Версия 1.0 | Разноязычно
EU declaration of conformity (DoC)
- Connect the mouse to the USB-port of the computer
- The computer will recognize the mouse and install the built-in driver, this might take a few moments
- The mouse is ready to be used
- Download the latest driver (with adminstrator rights) via the website
- Click on the “23645_X.exe” and follow the installation wizard.
- Click on the “TRUST GXT 950 Gaming Mouse” shortcut to start the software.
- You can now start to configure the mouse. In the manual will be referred to ‘Apply’ to update the
mouse. Updating the mouse can take up to 20 seconds depending on your system.
Assign a function
- Click on the Button you want to re-assign
- Click on the function you want to assign.
- Click on ‘Apply’, the mouse is being updated.
Note: At least one Mouse Button has to be assigned as “Left Click”.
Create a macro
- Click on the ‘Macro Manager’ button.
- Click on ‘New’ to create a new macro.
- Set the delay time between each action and/or the loop/repeat setting.
- Click ‘Start record’ to start recording the macro. Now enter your preferred macro sequence.
- Click ‘Stop record’ to stop recording the macro. (max. 62 actions)
- Click on ‘OK’.
- The created macro is now available under the ‘Macro’ function.
Assign a macro
- Click on the Button you want to re-assign
- Click on the function you want to assign.
- Click on ‘Apply’, the mouse is being updated.
Note: At least one Mouse Button has to be assigned as “Left Click”.
Change the Lighting:
- Click on the ‘Lighting’ tab.
- Change the light mode.
- Change the animation speed.
- Click on ‘Apply’, the mouse is being updated.
Check the following:
- The product is connected correctly to the computer.
- The software has been restarted.
- You have downloaded, installed and are using the software with administrator rights (run as administrator).
When the file doesn't completely download/install to your computer, we recommend:
Please note:
Make sure that when you download, install and use the program you are doing so with administrator rights (right-click > run as administrator).
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
This particular product has been developed for use with the Windows operating systems only.
Therefore drivers or installation instructions for other operating systems such as Mac are not available.
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.