Compact Bluetooth® speaker perfect for travel and outdoor use
Bluetooth speaker
Micro-USB charge cable
Aux cable
User Guide
Bluetooth device
Aux output (3.5mm)
Micro SD
Wall charger or USB port
Version 1.4 | Multilingual
Legal & Compliance information
Version 1.0 | Multilingual
EU declaration of conformity (DoC)
- Connect the speaker to a USB-charger, which is connected to a wall power outlet.
- Charging the speaker will take approx. 3 hours. The LED on the case will be red when charging. When the speaker is fully charged the light will switch off.
- When the speaker has been fully charged, switch the speaker on by pressing the middle button for 4 seconds.
- Start the pairing process by pressing both the upper and lower button for 4 seconds.
- The LED on the speaker will flash blue when the speaker is in pairing mode.
- Go to the Bluetooth section on the device you are pairing to and select the TRUST ROKKO to pair.
- The LED on the speaker will stay blue when the speaker has been successfully paired.
- The Rokko is ready for use.
Make sure that the SD-card is a FAT32 formatted microSD card of max. 32GB with .mp3 files.
You can pair two Rokko speakers.
You cannot pair the Rokko to a different type of speaker.
- Press both the upper and lower button on 1 of the speakers for 4 seconds.
- Press both the upper and lower button on the other speaker.
- The 2 speakers are linked together.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
The IPX rating shows how well the product is protected from water.
IPX5: Can resist a sustained, low-pressure water jet spray. But it can't resist high-pressure, heavy sprays of water or submersion in water.
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.