Grupta yeni
Ceto
Temassız Akıllı Kart Okuyucu
Hızlı ve kolay kimlik doğrulama için temassız akıllı kart okuyucu
Gerçek
Oturum açmak veya kimliğinizi doğrulamak için NFC özellikli akıllı kartınızı kart okuyucuya dokundurmanız yeterlidir. Bu tür şeylerin karmaşık olması gerektiğini kim söyledi ki?
Temel Özellikler
Temassız, plastiksiz
%85 oranında geri dönüştürülmüş malzemelerden yapılmış ve sürdürülebilir ambalajlarla paketlenmiş Ceto, zaman israfını ve plastik atıkları azaltmayı gözetir. Böylece içiniz daha rahat bir şekilde gününüze devam edebilirsiniz.
Sorunsuz kimlik tanıma
Web sitelerinde hızlı ve kolay herkese açık yönetimli kimlik doğrulaması ve tanımlaması için mükemmel olan Ceto ile yanlış kimlik durumlarıyla karşılaşmazsınız.
Kolay taşınır, kolay kurulur
1-2-3 diye saymaktan bile daha kolay! Kurulum gerektirmeyen bu fare ile USB üzerinden bağlanın, kullanmaya başlayın kazandığınız vaktin keyfini çıkarın. İyi eğlenceler!
product-specifications
Özellikler
General
USB type
USB-A
Sustainability
Plastic material
rABS
Sustainability method
PCR
Recycled content %
85 %
Size & Weight
Total weight
36 g
Weight of main unit
36 g
Depth of main product (in mm)
80 mm
Width of main product (in mm)
67 mm
Height of main product (in mm)
7 mm
Installation
Installation type
external
Connectivity
USB version
2.0
Cable length main cable
60 cm
Input
Power source
USB
Compatibility
Supports SDHC/SDXC?
No
Smart card: works with
DNI 3.0
Compatible cards
smartcard
Compatible Device Types
laptop, pc
Compatible Software Platforms
Windows, MacOS
Ekstra bilgi
Ürün numarası
24736
EAN-kodu
8713439247367
Garanti
1 yıl
Ambalajın içeriği
Akıllı kart okuyucu
Kullanım kılavuzu
Sistem gereksinimleri
Windows 10 veya 11
macOS 10.15, 11 veya 12
USB bağlantı noktası
Dosyalar
Dosyalar
Uyumluluk bilgileri
Versiyon 1.0 | Çok dilli
Uyumluluk bilgileri
compliance
EU declaration of conformity (DoC)
Versiyon 1.0 | Çok dilli
EU declaration of conformity (DoC)
faq
FAQ
Sıkça Sorulan Sorular (FAQ)
There is no driver needed or available for this device. Once the device is connected, your system installs its own built-in system driver for it.
- Make sure your system is up to date
- Unplug the device and restart the system.
- When your system has completely loaded, connect the device directly to the USB port without using a hub or an extension cable.
- Check in the Device Manager if the product is correctly installed or if there is any error message reported.
- The device is ready to be used.
The function of the card reader device is basically to read the Smartcard.
Depending on the public service / agency that you want to connect to, a specific application (software) may be necessary. This software is provided by the service / agency (i.e. not by Trust) and is usually available via the website of the service / agency.
When the card reader and the software from the service / agency have been installed, you can simply tap your NFC-enabled smartcard on the smartcard reader to log in or authenticate yourself.
The LED will turn on when it is reading the smartcard.
In case of an error, the LED will not switch on but will remain blinking, we advise to make sure that the device has been installed correctly, the smartcard is compatible with the reader and the chip of the card is readable (ie no cover or case is used, or no debris/dirt or other obstacle is between chip and reader), then try again.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
supportMail
Bize Ulaşın
Bize Ulaşın
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.