Temmuz-Mevcut
2.0 Hoparlör seti
5 Watt'lık RMS çıkışı ile kompakt stereo hoparlör seti (10 Watt tepe gücü)
product-specifications
Özellikler
General
Type of speaker
2.0
Features
Power saving
No
NFC
No
Hands-free phone calls
No
Tripod mount
No
Size & Weight
Total weight
520 g
Depth of main product (in mm)
95 mm
Width of main product (in mm)
75 mm
Height of main product (in mm)
185 mm
Control
Remote control
no
Controls
volume, on/off
Connectivity
Connection type
wired
Bluetooth
No
Cable length audio cable
120 cm
Cable length satellite cable
120 cm
Audio
Power output (peak)
10 W
Copy of Power output (RMS)
5 W
Frequency response
100 Hz - 20.000 Hz
Driver size
80 mm
Driver units
2
Audio input
3.5 mm
Audio output
3.5 mm
Headphone connection
Yes
Microphone built-in
No
Microphone connection
No
Speaker impedance
4 Ohm
Input impedance
10000 Ohm
Lighting
Lights
No
Protection
Waterproof
No
Power
Power cable detachable
No
Input
Power source
USB
Satellites
Satellite Height (mm)
185 mm
Satellite Width (mm)
75 mm
Satellite Depth (mm)
95 mm
Compatibility
Compatible Device Types
pc, laptop
Compatible Consoles
no
General compatibility
pc with 3.5mm audio output and USB port
Ekstra bilgi
Ürün numarası
24660
EAN-kodu
8713439246605
Garanti
1 yıl
Ambalajın içeriği
Kabloları takılı hoparlör seti
Kullanıcı kılavuzu
Sistem gereksinimleri
3.5 mm ses bağlantısı
USB bağlantı noktası (güç için)
Dosyalar
Dosyalar
compliance
EU declaration of conformity (DoC)
Versiyon 1.0 | Çok dilli
EU declaration of conformity (DoC)
faq
FAQ
Sıkça Sorulan Sorular (FAQ)
To install the speaker set
- Connect the USB-cable to the USB-port of the computer for power (or to a USB-charger that is connected to a wall power outlet)
- Connect the audio cable to the 3.5mm audio port of the computer for sound
- Switch the speaker on with the button on the front
- Turn up the volume on the speaker as well as on the computer
- Set the speaker as the default audio device on the computer
- The speaker is ready to use
When you connect headphones to the speaker (or its remote), you control the volume via the computer, not via the speaker (or its remote).
If you are experiencing audio issues on your Dell computer, make sure to install the latest audio drivers for your computer from the Dell website at https://www.dell.com/support/home/en-us?app=drivers
After you have installed the Dell software and drivers for your computer setup the software correctly to activate the audio devices:
1. Go to the Windows Start Menu and open the Dell Optimizer software.
2. Click the Audio button.
3. Toggle the Switch to ENABLED.
4. Toggle the NOTIFICATIONS on.
5. Disable the Audio page and close the application.
6. When plugin the microphone, headset or headphones, the Optimizer will notify that a device is connected to the audio port. Select the correct device that is attached in the Optimizer option menu.
If this does not solve your problem, contact the Dell support or your system administrator.
We recommend to check the following:
- Are all the cables connected correctly and securely?
- Are the sound settings set to stereo (not mono)?
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
supportMail
Bize Ulaşın
Bize Ulaşın
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.