Spor yaparken kullanmak üzere kablosuz ve su geçirmez Bluetooth kulaklıklar
Bluetooth kulaklıklar
Şarj kılıfı
Mikro-USB şarj kablosu
Ekstra 2 çift kulak askısı
Ekstra 2 çift kulak tıkacı
Kullanım kılavuzu
Bluetooth özellikli Akıllı telefon veya tablet
Kılıfı şarj etmek için USB şarj cihazı veya taşınabilir şarj aleti
- Connect the case (with the headset inside the case) to a USB-charger, which is connected to a wall power outlet.
- Charging the case will take approx. 3 hours. The LED on the case will flash blue when charging. When the case is fully charged the light will stay blue.
- When the case has been fully charged, take one of the earbuds out of the case. The LED on the earbud will flash red/blue.
- Go to the Bluetooth section on the device you are pairing to and select the TRUST NIKA SPORTS to pair.
- The LED on the earbud will stay blue when the earbud has been successfully paired.
- After the earbud has been paired, take the other earbud out of the case, so the earbuds can automatically link together
- The Nika is ready for use.
Yes, the controls are present on both earbuds.
The button on the case is for starting the charging process and for checking the battery status.
When the headset has been paired to your phone, you can switch them on by pressing the button for 10 seconds, and off by pressing the button for 6 seconds.
If the earbuds won't link together, probably both earbuds are set as 'master', we advise the following to resolve this:
- Ensure that the earbuds are unpaired from all devices (phones, tablets, laptops, etc.), they were previously paired to.
- Turn off the earbuds.
- Turn both earbuds on with the button on the earbuds and keep holding the button until they flash purple (red/blue at the same time). This should happen after about 15 seconds.
- Switch the earbuds back on with the button and wait 20 seconds, the earbuds will now connect to each other.
- Pair the earphones again with the device (phone / tablet) via Bluetooth
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
As of iOS 11.2, when you are using a Bluetooth headphone and receive a phone call, the button that you use to pick-up the phone call, determines which device is used for the audio.
If you pick-up the phone call with the green button on the iPhone display, then all the audio will be handled by the iPhone microphone and speaker (and not with any connected Bluetooth device).
If you pick-up the phone call with the call pick-up button on the Bluetooth device (headphone or speaker), then all the audio will be handled by the Bluetooth device.
If the person that is calling you cannot hear you – or the other way around – it may be possible that you picked up the phone with one device and are talking via another.
Use the audio icon on the iPhone display during the phone call to change the audio device.
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.