Bluetooth speaker
USB-C charge cable
Aux cable
User guide
Bluetooth device / Aux output (3.5mm) / Micro SD
Wall charger or USB port
- Connect the speaker to a USB-charger, which is connected to a wall power outlet.
- Charging the speaker will take approx. 3 hours.
- When the speaker has been fully charged, switch the speaker on by pressing the on/off button 1x.
- Start the pairing process by pressing the button (marked with the Bluetooth logo) 1x
- The LED on the speaker will flash blue when the speaker is in pairing mode.
- Go to the Bluetooth section on the device you are pairing to and select the TRUST ZOWY MAX to pair.
- The LED on the speaker will stay blue when the speaker has been successfully paired.
- The Zowy Max is ready for use.
You can pair two Zowy Max speakers.
You cannot pair the Zowy Max to a different type of speaker.
- Put the 2 speakers close together
- Press the button (marked with the Bluetooth logo) on the left speaker for 4 seconds
- The 2 speakers are linked together.
You switch the input mode by pressing the on/off button for 4 seconds (If you press it 1x, it will switch on/off instead).
You switch the speaker on/off by pressing the on/off button 1x (If you press it for 4 seconds, it will switch input mode instead).
To play music via SD-card, you have to switch to SD input mode. And use a fat32 formatted microSD card, with max. 32GB, with mp3 audio files.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
IPX7: Can be submerged up to 1 meter in water for 30 minutes.
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.