product-specifications
Specifications
General
Type of speaker
5.1
Features
Power saving
yes
NFC
no
Hands-free phone calls
no
Tripod mount
no
Control
Remote control
wireless
Controls
power saving button, volume, bass
Connectivity
Connection type
wired
Bluetooth
no
Cable length audio cable
180 cm
Cable length subwoofer to front satellite cable
280 cm
Cable length subwoofer to rear satellite cable
800 cm
Cable length subwoofer to center satellite cable
280 cm
Audio
Power output (peak)
75 W
Power output (RMS)
150 W
Power output - subwoofer (RMS)
35 W
Power output - satellite (RMS)
8 W
Frequency response
20 Hz - 20.000 Hz
Driver size
150 mm
Driver units
7
Audio input
3.5 mm
Headphone connection
no
Microphone built-in
no
Microphone connection
no
Speaker impedance
4 Ohm
Lighting
Lights
no
Protection
Waterproof
no
Power
Power cable detachable
yes
Input
Power source
wall socket
Satellites
Satellite Height (mm)
185 mm
Satellite Width (mm)
106 mm
Satellite Depth (mm)
120 mm
Subwoofer
Subwoofer Height (mm)
250 mm
Subwoofer Width (mm)
250 mm
Subwoofer Depth (mm)
260 mm
Center speaker
Center speaker Height (mm)
110 mm
Center speaker Width (mm)
230 mm
Center speaker
Center speaker Depth (mm)
125 mm
Remote
Remote Height (mm)
7 mm
Remote Width (mm)
40 mm
Remote Depth (mm)
87 mm
Compatibility
Compatible Device Types
pc, laptop
Compatible Consoles
no
General compatibility
pc with 5.1 analog output
Extra information
Item number
21786
EAN code
8713439217865
Warranty
1 year
Package contents
Subwoofer
4x satellite speaker with cable attached
1x center speaker with cable attached
Wireless remote control with battery included
Power cable
User guide
System requirements
PC with 3x 3.5mm audio output
Wall power connection
faq
FAQ
Frequently Asked Questions (FAQ)
If you connect the green audio jack to the laptop's audio port, the speaker set will work as a stereo speaker set, without the 5.1 effect.
The speaker set has 3 connections for front / rear and center / sub.
If you connect all three cables to 1 audio output, then you do not have a 5.1 effect.
It is possible to use a splitter, but the splitter will go from 1 to 3 outputs, distributing the sound without maintaining the quality of 5.1.
The speaker set requires a computer with 5.1 audio capability for full functionality.
Your speaker set will go into Standby mode if it doesn’t detect audio input after a specific amount of time.
This speaker set uses a fixed threshold input level to enable the smart power management feature. This means if you greatly lower the volume your speaker set might interpret this as silence and go into Standby mode.
To avoid this from happening, turn up the volume as high as it can go without distortion setting in, and use the volume controls on your speaker set to determine how loud (or soft) you want your audio.
Please note that some computers won't let attached devices resume from standby-mode due to configuration, the speaker set then has to be switched on manually.
First check the battery. If the battery starts to run out, the working distance of the remote decreases and the speaker will often no longer respond consistently. Try a new battery, and check if the issue persists.
If a new battery doesn't fix the issue, contact our support team for further advice.
-
Make sure the subwoofer volume knob is turned up (not set to zero).
-
Check cable connections of subwoofer.
-
Check connection of speaker to soundcard (colors of connectors must match colors connectors PC-side)
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
You can use this speaker set with any computer with 3x 3.5mm audio output ports.
supportMail
Contact us
Contact us
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.