Wireless keyboard with full-size keys and compact mouse
Wireless keyboard
Wireless mouse
Micro USB receiver
2x AAA batteries (mouse)
1x AA battery (keyboard)
User guide
Windows 10, 8, 7
Intel-based Mac with Mac OS X 10.10 (Yosemite) or higher
USB port
Version 2.0 | Multilingual
Legal & Compliance information
Version 1.0 | Multilingual
EU declaration of conformity (DoC)
First doublecheck the batteries, then connect the receiver to the computer, and wait until Windows recognizes it and installs the built-in driver.
This might take a few moments. After which a pop-up screen is shown with "Device Setup > Installing device".
When this screen has disappeared the installation is finished and the product is ready for use.
The keys have a special function defined by the operating system. Whether these keys can be changed depends on your computer and operating system. We would advise to consult your computer's manual for more information.
This keyboard doesn't have caps-lock, num-lock and scroll-lock indicators. It has an indicator for low battery.
By pressing the DPI-button you will change the DPI.
There is no visual indication for the DPI selection, other than that the pointer speed on the screen will be faster or slower, depending on the DPI that is selected.
Follow the steps in the mouse settings page
To make sure that there is no signal still going from the computer to the product, when the product is not used (since some computers continuously power their USB-ports, even when the computer itself is switched off), we recommend to doublecheck the power management options of the USB-port, if switching the product on/off is not an option.
Depending on the version of your mouse, the receiver is stored either inside the product (bottom) itself, or inside the battery compartment of the mouse.
It's not possible to provide a replacement receiver for this product.
This is due to the fact that during production the product and receiver receive a unique code, so the product can only communicate with the bundled original receiver.
We advise to doublecheck the batteries, then re-install the keyboard and mouse.
To re-install:
- Disconnect the receiver from the computer
- Restart the computer
- When the computer has fully restarted, connect the USB-receiver to the computer.
- Wait until Windows recognizes it and installs the built-in driver. This might take a few moments.
- After which a pop-up screen is shown with "Device Setup > Installing device".
- When this screen has disappeared the installation is finished and the product is ready for use.
If your keyboard isn't typing the correct characters, you may have the incorrect input language selected.
Please check the language preference settings of your system. If the correct language is not present, add this language to the system.
If you use more than one language on your system, make sure to select the correct one.
Set the correct language as explained in the keyboard settings page
- Remove the USB-receiver from the computer
- Remove the battery from the keyboard for at least 10 seconds.
- Restart the PC
- Insert the battery into the keyboard
- The red LED on the battery will light up briefly
- Press ESC + Q while this LED is lit.
- Now the LED should start flashing.
- Plug the USB-receiver into the PC within 5 seconds and wait until the LED stops blinking.
- The keyboard is now connected again.
Battery life depends on many variables including usage, quality of batteries and environmental factors (such as distance to receiver, nearby metallic objects, surface on which the product is used, etc. etc.).
This product uses standby (sleep) mode to save battery power. When the product is not moving or there is no signal from the USB receiver, it will turn sleep-mode on, to save battery power.
Make sure that when the battery is draining very fast, that there is no signal still going from the computer to the product, when the product is not used. Some computers continuously power their USB-ports, even when the computer itself is switched off. You can check this in the Power Management settings of the USB-port.
We advise to check the following:
- Doublecheck that Numlock is enabled.
- Mouse keys are turned off (control panel > ease of access > change how your keyboard works).
- The keyboard driver is up to date and no errors are visible in the Device Manager.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.