Эргономичная беспроводная мышь

To  install the mouse:

• Remove the cover on the bottom of the mouse
• Place a full battery in the mouse
• Remove the USB-receiver from the mouse
• Close the cover on the bottom of the mouse
• Place the USB-receiver in a USB-port of the computer
• Switch the mouse on with the button on the bottom of the mouse
• The computer will recognize the mouse and install the mouse to the computer, this might take a few moments
• The mouse is ready to use

You can switch the mouse off / on with the button on the bottom.

However, this mouse uses standby (sleep) mode to save battery power.
There is no need to switch it off.
When the mouse is not moving or there is no signal from the USB receiver, it will turn sleep-mode on, to save battery power.
When you use the mouse again, e.g. (depending on the type of mouse) by pressing a button, or by moving the mouse, it will switch on again.

For storage or travelling we would suggest to switch the mouse off.

When you press the dpi button the indicator will light up to indicate the selected dpi setting:
600 dpi: 1x
1200 dpi: 2x
1600 dpi: 3x

If the battery is low, the indicator will light up (without pressing the dpi button. If the indicator lights up when pressing the dpi button, this indicates the dpi setting).

Follow the steps in the mouse settings page

К сожалению задать кнопкам другую функцию не представляется возможным, так как мышь работает со стандартным драйвером системы. Специальной программки, которая позволила бы изменения функций кнопок, в комплекте не прилагается.  

Можно посмотреть в интернете, может быть можно скачать программку для программирования кнопок

Вот например с этого сайта http://www.highrez.co.uk/downloads/XMouseButtonControl.htm

Но заметьте, что это неофициальное решение и мы не можем дать гарантии, что данное ПО вообще будет работать с данной мышью.

Depending on the version of your mouse, the receiver is stored either inside the product (bottom) itself, or inside the battery compartment of the mouse.

It's not possible to provide a replacement receiver for this product.
This is due to the fact that during production the product and receiver receive a unique code, so the product can only communicate with the bundled original receiver.

• Try using the mouse on a different surface or use a mousepad.
• Clean the sensor on the bottom of the mouse with a dry cloth.
• Improve wireless performance.

Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.

We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty