Компактный, удобный для обеих рук дизайн подходит как для левшей, так и для правшей и избавляет от беспорядка на рабочем столе, поэтому вы можете спокойно работать.
Беспроводное соединение на частоте 2,4 ГГц с радиусом действия 10 м означает, что вы можете работать с полной свободой передвижения, без клубков, узлов - или кабелей, и точка.
Потеряли нить событий? Не беспокойтесь - перезаряжаемая батарея поддерживает вашу продуктивность и предотвращает лишние отходы.
Благодаря двум основным кнопкам, колесу прокрутки и кнопке регулирования количества точек на дюйм вы всегда будете контролировать ситуацию, а ваши пальцы будут иметь еще ту физзарядку.
Беспроводная аккумуляторная мышь
Зарядный кабель (USB-C)
Микроприемник USB
Windows 10, 11
macOS 10.15, 11, 12
Chrome OS
Порт USB
Версия 2.0 | Разноязычно
Информация о соответствии
Версия 1.0 | Разноязычно
Информация о соответствии
Версия 1.0 | Разноязычно
EU declaration of conformity (DoC)
- Fully charge the mouse by connecting it via the charging cable to a USB-port. A full charge will take approx. 3 hours.
- Switch the mouse on with the on/off button on the bottom.
- Remove the USB-receiver from the storage compartment below the mouse.
- Connect the USB-receiver to the USB-port of the computer.
- The computer will recognize the mouse and install the built-in driver.
- This might take a few moments.
- The mouse is ready to use.
This product doesn't need any drivers to function.
Just connect and the product should work.
Charging takes approximately 3 hours. When it's charging the LED on the mouse has a constant blue light.
How long you can use the mouse, when it is charged, depends on many factors, such as how intense you use it and the surface you use it on.
The LED on top of the mouse will be continuously flashing when the mouse needs to be charged.
With the dpi-button you can switch between 800, 1200, 1600 dpi.
The LED-indicator indicates the selected dpi.
800 dpi = 1x LED flashing
1200 dpi = 2x LED flashing
1600 dpi = 3x LED flashing
- 1x LED flashing = 800 dpi selected
- 2x LED flashing = 1200 dpi selected
- 3x LED flashing = 1600 dpi selected
- Constant flashing = battery empty
- Constant blue light = battery charging
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.