GXT 930 Jacx

- Connect the mouse to the USB-port of the computer
- The computer will recognize the mouse and install the built-in driver, this might take a few moments
- The mouse is ready to be used
- Download the latest driver (with adminstrator rights) via the website
- Click on the “23575_X.exe” and follow the installation wizard.
- Click on the “GXT 930 Gaming Mouse” shortcut to start the software.
- You can now start to configure the mouse. Changes will be updated directly to your mouse. 
Updating the mouse can take up to 20 seconds depending on your system

Assign a function
- Click on the Button you want to re-assign
- Click on the function you want to assign.
At least one Mouse Button has to be assigned as “Left Click”.

Polling Rate
- Click on the ‘Advanced’ tab.
- Change the Polling rate by clicking on the respective frequency.

Mouse Parameter
- Click on the ‘Advanced’ tab.
- Change the Windows acceleration, Windows pointer speed, Windows scroll speed or Windows doubleclick speed by dragging the respective cursor.

DPI setting
- Click on the ‘Advanced’ tab.
- Choose a LED color for each DPI setting.
- Change the DPI level by dragging the respective bar.

Create a Macro (Store a sequence of keys in the software)
- Click on the ‘Macro’ tab.
- Click on ‘New macro’ to create a new macro.
- Set the delay time between each action and/or the loop/repeat setting.
- Click ‘Record’ to start recording the macro. Now enter your preferred macro sequence.
- Click ‘Stop’ to stop recording the macro. (max. 168 actions)
- Click on ‘Add to Mouse’.
- The created macro is now available under the ‘Macro’ function.

To assign a macro
- Click on the Button you want to re-assign
- Click on the function you want to assign.
At least one Mouse Button has to be assigned as “Left Click”.
 

Profile settings:
- Click on the ‘Buttons’ tab.
- Select one of the 2 profiles by clicking on the preferred profile.
- Click on ‘Save Profile’ to save a setup, Click on ‘Load Profile’ to load a setup.
- Enter a name for the mouse setup you want to save, or choose the preferred profile to load.
- Click on ‘Save’ to save the setup, click on ‘Open’ to load the setup.
 

It's not possible to turn the lights totally off. The LED light of the scroll wheel and/or the GXT logo will remain lit.

Change the Lighting
- Click on the ‘Light Setting’ tab.
- Change the LED mode.
- Change the lighting effect speed

Yes, it is possible to press multiple buttons simultaneously. 

Please note that this doesn't mean that all buttons can be pressed simultaneously, since this depends on the specific hardware of a mouse. Mice may have the hardware limitation that the thumb buttons can't be used together with left/right/mid click.

Make sure the TRUST GXT 930 mouse is connected and try to start the software again.

- Click on the ‘Buttons’ tab.
- Click on ‘Reset’ to reset all profiles to factory default

Check the following:
- The product is connected correctly to the computer.
- The software has been restarted.
- You have downloaded, installed and are using the software with administrator rights (run as administrator).

When the file doesn't completely download/install to your computer, we recommend:

• Delete the downloaded file or files
• To uninstall the installed file
• After all is removed and uninstalled, re-download the file from the website. 

Please note:

• Install the file only after it has been fully downloaded, otherwise you will receive an error.
• Alternatively use a different browser and/or a download manager to download the file.
• Make sure to install the file with administrator rights.
• Check that your virus software program is configured correctly for downloads.
• When more than 1 file is available, make sure to download the correct file for your article version and operating system version.

• Try using the mouse on a different surface or use a mousepad.
• Clean the sensor on the bottom of the mouse with a dry cloth.

Make sure that when you download, install and use the program you are doing so with administrator rights (right-click > run as administrator).

Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.

We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty

This particular product has been developed for use with the Windows operating systems only.

Therefore drivers or installation instructions for other operating systems such as Mac are not available.