This product is no longer available in the current Trust assortment.
Ultraslim
Universal laptop charger with 70W output power
Ultra thin universal 70W laptop charger for use in your car, that works with virtually any laptop
Is this charger compatible with my laptop?
product-specifications
Specifications
General
Number of USB ports
1
Features
Number of tips/connectors included
7
Free Tip / Connector Service available
yes
Special features
ultrathin
Size & Weight
Total weight
186 g
Depth of main product (in mm)
90 mm
Width of main product (in mm)
56 mm
Height of main product (in mm)
17 mm
Connectivity
Cable length main cable
150 cm
Cable length power input
35 cm
Cable length power output
150 cm
Protection
Protections
short-circuit, over-heat, over-load
Input
Power source
car DC socket
Input power
12V DC
Output
Voltage setting
manual
Output voltage
15, 16, 19
Max output amperes
4.5 A
Total max output power (W)
70 Watt
Mains socket
Power cable length
35 cm
Compatibility
Laptop voltage range
15 V - 20 V
Compatible Device Types
laptop
Compatible Brands
Acer, Asus, Compaq, Dell, Fujitsu, HP, IBM, Lenovo, Medion, MSI, Packard Bell, Samsung, Sony, Toshiba
Other
Power Factor Control
no
Extra information
Item number
18065
EAN code
8713439180657
Former name
70W Ultraslim Notebook Power Adapter for car use
70W Thin Laptop & Phone Charger for car use - black
Warranty
1 year
Package contents
Laptop charger with cables attached
7 swappable tips
User guide
System requirements
Laptop from supported brand that requires 15-20 Volt and 70W power or less
12V DC car power or cigarette lighter socket
For USB charging: USB cable supplied with your portable device
Downloads
Downloads
Legal & Compliance information
Version 4.0 | Multilingual
Legal & Compliance information
compliance
EU declaration of conformity (DoC)
Version 1.0 | Multilingual
EU declaration of conformity (DoC)
faq
FAQ
Frequently Asked Questions (FAQ)
-
Check the voltage on the bottom of your laptop or in your laptop's manual. The voltage is indicated with … V or ...Volts (see picture below)
Note: If the exact voltage is not available on the laptop charger, select the closest voltage below. For example: in below situation, if 18.5 Volts can not be selected, set the charger to 18 Volts.
If the correct connector for your laptop model is the connector P (or P/B) according to our advisor, then you don't need an extra connector. This connector is the one that is attached to the charger cable and is also the base for the rest of connector tips.
You should not use any of the connectors available in the package, but connect the charger directly to your laptop, since the charger comes already with this connector attached to the end of the cable.
in case you have a charger with a manual voltage selector: you may need to adjust the voltage of your charger, if the charger doesn't charge your laptop.
If your charger has a voltage selector (usually located on the side of the charger), make sure that it is set at the correct voltage for your laptop.
This is normal for a laptop charger.
Put the charger on the ground under your desk/table with sufficient ventilation.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
There is no connector with a USB-C connection available for our regular chargers.
For USB-C a different type of charger, a USB-C charger, is required.
This charger is for use with: Acer, Asus, Compaq, Dell, Fujitsu, HP, IBM, Lenovo, Packard Bell, Samsung, Sony, Toshiba. Check full compatibility at https://www.trust.com/19134/compatibility
spareParts
Spare Parts
Spare Parts
In case of a laptop connector: First check via the Advisor which connector is needed. Then if the connector is missing from the package, or broken, use the form to request this connector.
Standard processing time, from the moment the request is send to the time that the part is delivered, is 1-2 weeks, depending on the location of the shipment address and the availability of the item(s).
supportMail
Contact us
Contact us
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.